192.168.31.1 - Login Admin
How to login to 192.168.31.1?
Connect router with cable to your computer or use wireless connection. Double-check the device that you wish work on is connected to the Wi-Fi.
Note: Default login Username & Password, IP address is printed in back side of your router.
Open web browser and type the router IP address in the address bar.
Enter the default username and password of your router by accessing the admin panel.
Note: If none of the above are successful, type your router’s name into your browser to locate the default login username and password you need.
Forgot Login Password?
Try hard resetting your router login. To do this, press and hold the RESET button found at the back of your router for around 30 sec. This will reset your router to the factory settings.
Router login page not loading?
If the login page is not loading, make sure the device you are using is connected to the Wi-Fi. You will also need to check if the wrong router IP address is set as the default one.
Problems with speed?
In this case, your network is probably using a different IP address.
- Find the correct IP address first.
- Find Your Router IP Address Using ipconfig
Finally, you can find your router IP address by running an IP configuration scan using the following steps:
Enter ‘Command Prompt’ and press OK.
Type in ‘ipconfig’ and click Enter.
Look for your router’s IP address and make a note of it.
Now, you can type this IP address into the address bar of your browser to navigate to the setup pages.